A Free Online Community for Tattoo Art
-1
(1 | 2)
jason haney's Gallery

jason haney's Gallery

Posted by Jason Haney on 5/23/2006
 Featured
tattoos foot-switches and tattoo machines by JASON HANEY.for more info e-mail me at fltattoos31@yahoo.com

Images

Browse Sub-Pages of jason haney's Gallery

#41 Rum Runner Liner & Shader

#41 Rum Runner Liner & Shader

#41 Rum Runner Liner & Shader
This matching set was originally made by
Chris Quidgeon of Bare Knuckle Irons in 2006.
It was recently engraved and rebuilt by
Jason Haney of BadBrass Productions in 2008
[$600 for the pair / $325 separately]PROS ONLY ,, NO EXCEPTIONS !!!!!!!!!!

you are welcome to contact me through this site Or e-mail me at jason@tattoomachinez.com or go to my page on tattoomachinez.com

thanks for your time,
jason
(2 images)
* Featured Page *
1 of a kind big prick shader.

1 of a kind big prick shader.

this one of a kind big prick shader was built to pack color but if turned down to the correct tuning, it will blend color like a champ. this one is sold but i would love to build you a costume machine as long as you can prove you are a pro tattooer.

thank you for checking it out
jason haney
tattoomachinez.com
(5 images)
* Featured Page *
160 HTZ Compact Liner

160 HTZ Compact Liner

160 HTZ Compact Liner,
Original frame by Ed Bell
engraved & Re-Built by me . this little machine is not only very fast but it has a nice long stroke and will never need to be run above 6 volts for most applications .the side plate and rear deck are copper and the base is brass. the coils are .750 of one inch and are covered in silk then well coated for EZ cleaning . this machine is for sale at the price of 350.00 US you can see this machine and more at TATTOOMACHINEZ.com for more info , contact "jason@tattoomachinez.com" or just message me on this site.

PROS ONLY !!! NO EXCEPTIONS !!!

thanks for your time.
"jason haney"
badbrass.com
tattoomachinez.com
(4 images)
2 new machines!!

2 new machines!!

the bull dawg is a very hard hitting traditional shading machine running a about 80 hz. it will push any size grouping you need and do it well.
the second machine is a silver plated gizmo with a beautiful quilted inlay . its a very fast liner running at 140 hz at right around 4 volts . they are for sale at the price of 350.00 each . you can see this machine and more at TATTOOMACHINEZ.com for more info , contact "jason@tattoomachinez.com" or just message me on this site.

PROS ONLY !!! NO EXCEPTIONS !!!

thanks for your time.
"jason haney"
badbrass.com
tatto...
(7 images)
* Featured Page *
2 New Shaders for Sean E Bones

2 New Shaders for Sean E Bones

Here are two machines that were built for Sean E Bones. One will be a soft black & grey or color shade machine, the other will be a hard hitting tribal black or color machine. I Hope you like them brother, cause I do.
(1 image, 1 comment)
* Featured Page *
2 recent tattoos

2 recent tattoos

skull w/ cross bones and snake w/ flower
(2 images)
* Featured Page *
3 new machines!!

3 new machines!!

here are pics of 3 new machine i resonantly finished. they have all sold but the rogers style shader.the price for the shader is 350 plus shipping same as all my machines for the most part. please be sure to check out tattoomachinez.com for the most beautiful and functional machines money can buy.for more info , message me here or hit me up via e-mail at jason@tattoomachinez.com
... for your time
jason
(4 images)
* Featured Page *
a new tattoo and stuff

a new tattoo and stuff

here is a new tattoo i did of some flash from a new book i got at the STL expo . and some other pics to
(5 images)
* Featured Page *
a sweet lil prick.

a sweet lil prick.

heres a lil prick liner i built last week. if your into it, you can contact me about building a machine anytime . thanks for checking it out and for more info go to .
tattoomachinez.com
(2 images)
All Iron Bad Brass Walker Cutback Liner

All Iron Bad Brass Walker Cutback Liner

This is an iron liner that has been overlaid with flame maple. It is also faded from black to blue with pinstriping. Lines well from 5.5 to 6.5 volts. The price for this machine is set at $250. If interested, please contact me, thanks!
(3 images)
Aluminum Frame Build

Aluminum Frame Build

this is a ground up build off of a frame by Austin Riley (AMR machines) its an aluminum frame with silver plated binders, blue (hardware,yoke and a-bar) as well as a steel blue insert in the tube vice and lastly a copper plated spring set .she is a very strong liner that can handle any grouping you want to use with it.this machine is not for sale as it was built as a favor for a friend. if you would like a machine built or re-build please e-mail me with pics and a description off what all you would like done or if you just want me to do my thing at jason@tattoomachinez.com
also dont forget to check out tattoomachinez.com for some of the most dope machines money can buy. I ONLY SELL TO PROFESSIONAL TATTOOERS , IF YOU ARE NOT A PRO PLEASE DONT TAKE UP MY TIME...

thank you for your time,
jason
(7 images)
angel

angel

a small angel tattoo from last week.
(1 image)
Another green MONSTER!!

Another green MONSTER!!

This coffin footswitch is dye-faded from blue to green , with 2 beautiful gold coins and is pinstriped gold with a drop shadowed . The wood used has a very strong visual effect. This pedal would be an incredible addition to any collection and is for sale at the price of 225. with shipping.If you would like something built for you or if you would like this one , we would be happy to start your new Bad Brass machine or footswitch any time. To see more of Jason's machines and footswitches, go to http://www.tattoomachinez.com or to get this one e-mail me at fltattoos31@yahoo
(5 images)
* Featured Page *
Another Silver Bull Dog

Another Silver Bull Dog

This is a machine i build for a friend in texas. he was looking for a machine that would push larger mags and roll with him all day. its very powerful and looks great as well.the second machine was a mix match of part i had laying around , so i built it up and gave it to a friend. if you like what you see and want to have one built for yourself please contact me at jason@tattoomachinez.com for more info.
PROS ONLY!! IF YOU ARE NOT A PROFESSIONAL TATTOOER PLEASE DONT WAST MY TIME WITH A BUNCH OF QUESTIONS. I WILL NOT SELL A MACHINE OR TELL YOU HOW TO TUNE THE JUNK YOU GOT OUT OF THE BACK OF A TATTOO MAG. SORRY...
(7 images)
* Featured Page *
art work

art work

art work
(1 image, 3 sub-pages)
* Featured Page *
back to the 40s

back to the 40s

this bull dog has a interesting story behind it , we came across a set of antique coils from the 40s so after looking at them for a minuet i decided to build a frame around them,considering they are 1 and 1 half inc tall . so here it is , . its a steel frame brazed together w/ brass and copper coated . its one of the most power full shaders i have ever used and would work great for ANY large groupings . i will have this one and many others at the stl show this weekend . if you would like any machines or foot-switches for your self send me a message and ill help you as best as i can
thank you for your time
jason haney http://www.tattooartists.or...
(5 images)
badbrass tattoo machines

badbrass tattoo machines

(9 images, 2 comments)
bio-mech

bio-mech

here is a new foot-switch for you guys to look at. if you like it and or would like one for your self this style or any other style including machines just message me and i will do my best to accommodate any professional.
thank you for taking the time to look.
jason http://www.tattooartists.or...
(5 images, 1 comment)
* Featured Page *
black and grey

black and grey

(2 images)
* Featured Page *
blue

blue

a new foot-switch frome jason haney and badbrass . it was is a surprise piece for my friend Steve Martin and is not for sale. However, it is a good example of what i can do and something for you to consider when having Bad Brass do a custom machine or footswitch for you.
(2 images)
BLUE DEVIL

BLUE DEVIL

This is the latest footswitch from Jason Haney and Bad Brass
Productions. This snazzy blue devil is made from a beautiful highly modeled wood and is
lacquered for easy cleanup. In between all of that it is a beautiful blue fade and pinstriped with tan and blue . a unique freestyle
design. this one is sold but it is a good example of what Jason can do and something for you to consider when having Bad Brass do a custom machine or footswitch for you.
(2 images)
* Featured Page *
Blue Meanie

Blue Meanie

This pedal is made from flame maple and has been faded from black to blue. The pinstriping is a nice light blue and has been accented with a beautiful purple. Although this particular piece was a commissioned job specifically for someone, I would be willing to consider similar ideas if anyone else is interested in one. Please contact me, I'd love to know what you think.
(3 images)
Blueberry

Blueberry

This is a one of a kind Bad Brass mini liner by Jason Haney. It has been adorned with a beautiful piece of quilted maple stained blue and is set off with a perfect cream pinstripe. This machine is extremely powerful, running most lines at between 3.8 and 5 volts. Unfortunately this machine is already sold, but it is a great example of what Jason is capable of. If you would like something built for you, we would be happy to start your new Bad Brass machine or footswitch any time. To see more of Jason's machines and footswitches, go to http://www.tattooartists.or...
(3 images)
bulldog tattoo machines

bulldog tattoo machines

Here are 2 new bad-brass bulldog tattoo machines. I will be offering this frame as a production machine along with a few others over the next month or so. the price for a production bull-dog will be $300.00 and just like BK you can get it your way. Please be on the look out for some cool new machines and if your into any of them you can contact me at fltattoos31@yahoo.com or message me with any questions you may have about any of my machines or foot-switches.

Thank you for your time
Jason Haney
bad-brass
(3 images)
carved  oak

carved oak

a new foot-switch frome jason haney and badbrass . it was is a surprise piece for a and is not for sale. However it is a good example of what i can do and something for you to consider when having Bad Brass do a custom machine or footswitch for you.
(3 images)
carved and copper...

carved and copper...

Another lil prick liner. This one was built for my boy yimmy in o-hi-ho . If any one is in to getting a new machine or foot switch e-mail me at fltattoos31@yahoo.com or go to tattoomachinez.com for more info

Thyanks so much for your time
Jason Haney
(5 images)
* Featured Page *
Celtic Gold

Celtic Gold

Here is a brand new pair of Victorian style coffin footswitches built custom for Mike & Nate of 1st Amendment Tattoo in Ye Olde California (with another location in Georgia and more coming soon). This lovely pair of switches is faded from black to red. Each switch is heavily pinstriped with gold Celtic style patterns. These two switches are truly works of art. If you are interested in a work of art to call your own, please contact Bad Brass so we can get started on something for you right away. To see more of Jason's machines and footswitches go to badbrass.com
(4 images, 2 comments)
* Featured Page *
chop top shader for sale!!

chop top shader for sale!!

liner and a shader .
(liner sold) the liner is a standard liner running at about 130Hz at 6 volts . the shader is something i have bin working on for 3 days now, its chop topped and stretched . its geometry is almost a 1/4 " longer then a standard jonesy and runs at 106 Hz at 5 volts. this is what most are talking about when they say "cut back shader " i call it a chop top shader . in any case , its a very unique machine and will make a great working part of any professional tattooers machine collection.

the shader is the only one that's for sale. you can contact me on here or e-mail me at jason@tattoomachinez.com or it will be up on tattoomachinez.com later today.PROS ONLY!! NO EXCEPTIONS!!

thanks for your time ,
jason
(10 images)
coming soon

coming soon

My new web page will be up very soon.ill post more as i know more.also here are some pics of a raw casting i cleaned up and carved . it runs very well at 6.66 volts with 45% duty running at a speed of 106hz with 0 FT.also has a a Damascus steel armature bar. John Clark gave the raw frame and one bad a$$ lil liner to me at the St. Louis show and i am very grateful.
thank you for your time
Jason
(6 images)
* Featured Page *
coming sooon!

coming sooon!

we will be adding 3 new very talented builders to tattoomachinez.com this Wednesday the 26th. all the new members are very good a what they do or they would not be in the position they are in . so be sure to check out the site this Wednesday the 26th for some well made machines that could take your work to the next level .
(5 images)
Damascus heat treated walker

Damascus heat treated walker

this machine is a lil prick liner done in Damascus then heat treated . what you see is what you get. the color in this machine is simply beautiful.the hardware is also heat treated along with copper plaited springs , copper and brass binders,brass contact screw and topper,7 and a half wrap coils (lacquered for easy cleaning)the price of this machine is 400.00 plus shipping .PROS ONLY ,, NO EXCEPTIONS !!!!!!!!!!

you are welcome to contact me through this site Or e-mail me at jason@tattoomachinez.com or you can visit my site at. tattoomachinez.com

thanks for your time,
jason
(5 images)
* Featured Page *
Damascus machine

Damascus machine

you are looking at a 1 of a kind mini walker tattoo machine built by Jason Haney . it is built as a liner and runs on about 6 volts it also features a Damascus side plate and armature bar as well as an in set saddle with brass saddle clamp and brass binding post , the coils are one inch with 5/16 cores and red silk wraps . the contact screw is 8.32 and is clamped from the top and side.you can find this machine for sale on ebay . Item number: 260179813025
(5 images)
Dirty Old School

Dirty Old School

This specific machine was done by request for K2 from tattooz.net and I couldn't be happier with how it turned out. He wanted it "dirty" and it turned out to be exactly that. The frame is handcarved iron and the detailing was completely done freehand, like everything we put out. It has also been copper coated and modeled to appear aged. Runs like a champ even on low voltage, and will definitely stand the test of time. A cool old school look tuned with new school methods. I hope you like it, please comment one way or the other.
(3 images, 2 comments)
* Featured Page *
Divided this industry WILL fall.

Divided this industry WILL fall.

You may or may not know me. The ones that do, know that Im always looking for ways to bring professional tattooers together to protect this industry from outsiders and folks that are just looking to make money off of us and the art that we produce. If we stick together we can stop all these a-holes from profiting from years of hard work on the part of the work horse of this industry (the tattooer). In saying this I think I have found a good platform to work from. It is called the World Wide Tattoo Artist Guild. The site is available to Professional Tattoo Artists ONLY. We pride ourselves on maintaining the integrity of the site and it's members. Please do not invite apprentices, non-artist owners, or your buddy in his kitchen. PROS ONLY!!! . Please come check out http://tattooartists.ning.com/ and get yourself an account. You dont want to be left behind on this one. The members are already starting to split the guild up into state chapters. If you join and your state is not represented, feel free to start a state chapter yourself. Please post 3 or 4 pics and give a good URL (ie. MySpace.com, InkNation.com, TattooArtists.org) so we can approve your account a.s.a.p.

Thanks and remember, united we stand, divided this industry WILL fall.

Jason Haney , World Wide Tattoo Artist Guild
(2 images)
* Featured Page *
engraved foot switch

engraved foot switch

It is made of high grade brass and bronze silicate. It is meticulously engraved with a set of roses and leaves, accented with some finely detailed florentine. If you are looking for quality and longevity from your equipment, this foot switch is a fine example of both, and would make a beautiful addition to any collection. Don't get it twisted, this piece of equipment was meant to be used. It's engraved on the underside of the pedal with my initials and the date of completion. it is for sale at this URL address
http://cgi.ebay.co...
(6 images, 1 comment)
* Featured Page *
flowers

flowers

(2 images)
* Featured Page *
foot-switch for Lyle Tuttle

foot-switch for Lyle Tuttle

tattoo machines and foot-switches from Jason Haney and badbrass . to learn more about lyle and the history of tattooing go to http://www.tattooarchive.co...
(2 images)
footswitch and machine set from badbrass.com and jason haney

footswitch and machine set from badbrass.com and jason haney

the wood used is burl maple with an orange stain and lacquerd finish for EZ cleanup . yes its that orange if any one would like to buy it the price is $450.00 for the set.
(4 images, 2 comments)
footswitch from jason haney & badbrass.com

footswitch from jason haney & badbrass.com

inlay footswitch with 1873 silver doller.
(2 images)
footswitches by jason of badbrass

footswitches by jason of badbrass

footswitches by jason haney badbrass.com
(9 images, 1 sub-page, 2 comments)
free machine!!!!!!!!!

free machine!!!!!!!!!

this is a hand made one off carved "J" frame. i built it as a prize for a contest on the world wide tattoo artists guild. if you are a machine builder and would like a chance to work with some of the best in the biz then you need to look us up . we will be considering giving the winner a spot on my web site as a builder next to the likes of joshua carlton,johnclark,larry hanks and my self. so if you are a builder and you want to get your stuff out there, this may be a good way to do so

thank you for your time and good luck.
jason haney tattoomachinez.com
(5 images)
* Featured Page *
fun w/ flash

fun w/ flash

(3 images)
geisha

geisha

(4 images)
GIZMO LINER!!!!!

GIZMO LINER!!!!!

this machine is a work of art and runs just as good as it looks. its a brass frame with purple and green burl wood inlay . this machine has also bin hand engraved with a hand drawn classic florentine pattern. shes a runner with a speed of 132 Hz at 5.5 volts . it also has blued a-bar and yoke, copper screws and hand turned binging post . sweet lil liner with a long stroke and a hard hit. this machine is FOR SALE at the price of 400.00 please contact me at jason@tattoomachinez.com or message me on this site.

thanks for your time,
jason
tattoomachine...
(5 images)
* Featured Page *
gizmooooooo!!    Hz150

gizmooooooo!! Hz150

this is one of my gizmo liners . its a very efficient and beautiful liner running at 150 Hz , 0 follow through and a 46% duty cycle. this one is selling for 350.00 plus shipping . for more info contact me on this site or e-mail me a jason@tattoomachinez.com
to see more very efficient and beautiful machines visit TATTOOMACHINEZ.COM it will be put up on tattoomachinez.com later on today so be sure to take advantage of this opportunity to get it before it gos on the site.

PROS ONLY !! NO EXCEPTIONS!!!

thanks for your time,
jason
(3 images)
green coffin from jason haney and badbrass.com

green coffin from jason haney and badbrass.com

This coffin footswitch is dye-faded from green to yellow, with a beautiful antique 1935 coin and is pinstriped with a drop shadow. The wood used has a very strong visual effect. This pedal would be an incredible addition to any collection, and is priced at sold. thanks!
(1 image, 2 comments)
* Featured Page *
green inlay

green inlay

you are looking at a as of now 1 of a kind brass mini w/ yoke and green burl inlay. this jason haney / badbrass machine is a gift for a friend and is not for sale . if you are into a machine or footswitch get with me at fltattoos31@yahoo.com
thankl you for your time
jason haney
(5 images)
* Featured Page *
Hand carved coleman

Hand carved coleman

this is a one off hand made hand caved coleman tattoo machine. this one is sold but if you would like one like this one(or any other style) for your self, just let me know at fltattoos31@yahoo.com

thank you for your time
Jason
(6 images)
* Featured Page *
Heart Tattoo

Heart Tattoo

free hand
(1 image)
I like a lil blue w/ my green...

I like a lil blue w/ my green...

This coffin footswitch is dye-faded from blue to green to yellow with 2 beautiful gold coins and is pinstriped gold with a black drop shadowed . The wood used has a very strong visual effect. This pedal would be an incredible addition to any collection but and is not for sale. with shipping.If you would like something built for you or if you would like this one , we would be happy to start your new Bad Brass machine or footswitch any time. To see more of Jason's machines and footswitches, go to http://www.tattoomachinez.com or to get this one e-mail me at fltattoos31@yahoo
(3 images)
* Featured Page *
Jason Haney / Mike Young Collaboratio

Jason Haney / Mike Young Collaboratio

This machine started its life off as a mike young walker shader. the frame was raw but it already included all the parts. the only parts i replaced are the a-bar that i replaced with a gold plated Damascus a-bar , the gold plated contact screw , blue screws and i had the coin,front and back binders and the spring set all plated in gold. i engraved it then had the relief engraving gold plated as well. last i lacquered the coils up to perfection , for easy cleaning.this machine is not for sale as it was built as a favor for a friend. if you would like a machine built or re-build please e-mail me with pics and a description off what all you would like done or if you just want me to do my thing at jason@tattoomachinez.com
also dont forget to check out tattoomachinez.com for some of the most dope machines money can buy. I ONLY SELL TO PROFESSIONAL tattoOERS , IF YOU ARE NOT A PRO PLEASE DONT TAKE UP MY TIME...

(3 images)
jonesy

jonesy

jonesy tattoo machine by badbrass.
(3 images, 2 comments)
jonesy re-build for toby

jonesy re-build for toby

by badbrass
(1 image, 1 comment)
Last 2 machines of 2008

Last 2 machines of 2008

Here are the 2 last machines i build for 2008 . They are for sale at the price of 350 US. plus 10 shipping and Insurance. The first is a Black widow cast in brass and adorned with copper hardware and part excluding the binding post which are brass its set as a liner and is very efficient and beautiful as well. The second is another wood inlaid Gizmo liner cast in brass then plated in silver with blue hardware and parts , excluding the binding post which are silver plated as well. If you would like a machine built or re-build please e-mail me with pics and a description off what all you would like done or if you just want me to do my thing at jason@tattoomachinez.com
also dont forget to check out tattoomachinez.com for some of the most dope machines money can buy. I ONLY SELL TO PROFESSIONAL tattoOERS , IF YOU ARE NOT A PRO PLEASE DONT TAKE UP MY TIME...

thank you for your time
(2 images)
like i care bear

like i care bear

(2 images)
lil prick liner

lil prick liner

its one of my lil prick liners , very fast and hits very hard. ill be sticking it up on tattoomachinez.com later today so if your interested then please let me know asap. PROS ONLY,, NO EXCEPTIONS!!

thanks for your time.
jason
(2 images)
* Featured Page *
line work

line work

here is some line work i hope to get some time to mess with soon.
(6 images)
lotus

lotus

lotus on stone tribal.
(2 images, 1 comment)
* Featured Page *
machine for hand made 2007

machine for hand made 2007

here is my submission for hand made 2007 and the way to get the book it self.if your in to this machine or any of my machines , i would love to build a machine or footswitch for you. you can e-mail me a fltattoos31@yahoo.com for more info. and dont forget the new home of badbrass ,tattoomachinez.com coming soon

Hand Made 3 is 60$ plus $4.50 shipping Priority mail in the USA. Or 70 Euro to Europe or elsewhere (because of the increased shipping). You can paypal to kustomtattoo@yahoo.com ...dont forget your shipping address!!

karl is sold out of Hand Made 1 and 2.
(5 images)
mario tattoo

mario tattoo

mario and some other small junk
(3 images)
moon

moon

(2 images)
more black and red

more black and red

custom tattoo from this weekend
(3 images)
more new work

more new work

(3 images)
NEW BADBRASS FOOTSWITCH- HANDMADE HANDCASTED

NEW BADBRASS FOOTSWITCH- HANDMADE HANDCASTED

you are looking at the newest foot-switch from jason haney and badbrass . it would be a fabulous addition to any collection as it features a nice and heavy brass base or billet aluminum that was casted from a one off hand carved footswitch. In keeping with the handmade tradition, bases are casted inhouse using the finest brass or billet aluminum not casting brass. This means there is is not the porocity in the casting and will keep its shine. These are the first time these are being offered to the public, they are not even on the site yet, so get yours now. we do not want to insult anyones intelligence with offering you some expensive cord. Footswitches are set up to accept any normal standard clip cord like you would use on your machines.
(5 images, 2 comments)
* Featured Page *
new biz card

new biz card

computer generated art by jason haney.
(1 image)
new card art

new card art

some new card art I'm working on for my brother ed.
(1 image)
new foot-switch

new foot-switch

if any one is into a new machine or foot switch e-mail me at fltattoos31@yahoo.com

all foot switches and parts as well as machines and machine part are made in house we do not buy from others and re-build.

thank you for your time
jason
(2 images, 2 comments)
NEW foot-switch!!

NEW foot-switch!!

For sale today after noon on tattoomachinez.com please come check stuff out .
(5 images)
* Featured Page *
new footswitch by jason haney & badbrass.com

new footswitch by jason haney & badbrass.com

i did this one up for myself its 2 tone and the switch is handmade.ill be posting more that will be for sale this weekend . thanx
(4 images)
new footswitch from bad brass

new footswitch from bad brass

This is one of jason haney's latest pedals and it's already one of his personal favorites. Made from a quarter sawn oak base with a flame maple veneer and lacquered for easy cleaning this natural beauty is accented with a brilliant red pinstriping to set off the natural tiger stripe patterns wrapping through it. This badbrass one off would be a prize for any collection and would make a great gift for anyone, it's definitely the apple of our eyes right now. Please get in touch with us and let us know what you think, we've got more beautiful pieces coming soon! see more at http://www.tattooartists.or...
(3 images, 1 comment)
* Featured Page *
new hand made tattoo machine

new hand made tattoo machine

handmade tattoo machine see more at badbrass.com
(1 image, 2 comments)
new machine and foot-switch

new machine and foot-switch

here is a new machine and a new foot-switch that i have for sale at this time.this side wheeler tattoo machine is a 2 pc brass steel machine . all the steel is copper coated including the a-bar and binding post. it also features 8 wrap coil and 47 cap. this machine runs very well for not only packing color but gray shading as well. its a hammer if you want it to be . i build it to be a large mag fill machine and it lives up to that very well. ebay Item number: 260166954160
this foot switch would make a beautiful addition to any collection. Don't get it twisted, this piece of equipment was meant to be used. It's signed on the underside of the pedal with my initials and the date of completion.ebay Item number: 260166946162

thank you for your time
(4 images)
new one off mini liner

new one off mini liner

by badbrass hand carved by jason haney
(3 images, 1 comment)
new set from badbrass & jason haney

new set from badbrass & jason haney

root burl mini liner & full size shader lacqerd for EZ clean-up . you can see more on ebay under badbrass tattoo machine
(5 images)
next gen style

next gen style

this is a 1018 steel next gen style tattoo machine from jason haney aka "badbrass1". this machine Features all next gen hardware. it has 1 and 1/4 coils and runs on very low volts . it features a very fine burl wood in-lay that is stain turquoise. it also features copper coated frame. it is for sale for $350.00 and it is a great example of what Jason is capable of. If you would like something built for you, we would be happy to start your new Bad Brass machine or footswitch any time. To see more of Jason's machines and footswitches, go to http://www.tattooartists.or... or to get this one e-mail me at fltattoos31@yahoo.com
(4 images, 1 comment)
olive

olive

this is a beautiful jason haney and badbrass colemen tattoo machine. it has 1inc coils 1/4 yoke and runs on very low volts . it features a very fine burl wood in-lay that is stain olive green it also features copper coated hardware. this machine is for sale for the price of 400.00 if any one is into it send me an e-mail at fltattoos31@yahoo.com it is also a great example of what Jason is capable of. If you would like something built for you, we would be happy to start your new Bad Brass machine or footswitch any time. To see more of Jason's machines and footswitches, go to http://www.tattooartists.or...
(4 images, 2 comments)
* Featured Page *
olive jensen

olive jensen

this is a beautiful jason haney and badbrass owen jensen tattoo machine. it has 1 and 1/4 coils and runs on very low volts . it features a very fine burl wood in-lay that is stain olive green it also features copper coated hardware. it is not for sale but it is a great example of what Jason is capable of. If you would like something built for you, we would be happy to start your new Bad Brass machine or footswitch any time. To see more of Jason's machines and footswitches, go to http://www.tattooartists.or... or e-mail me at fltattoos31@yahoo.com

thank you for your time
(5 images, 1 comment)
one of a kind,100% hand made 3 coil tattoo machine

one of a kind,100% hand made 3 coil tattoo machine

You are looking at a one of a kind,100% hand made 3 coil tattoo machine built by Jason Haney of Badbrass. this machine Features 3 hand wound micro coils that are wound with 1930's antique coil wire , a Damascus steel armature bar ,copper plated spring set, in set yoke ,dual side plates,bronze binding posts and is hand carved as well. the tube vice is very strong and holds a tube very well. the machine runs on about 7-8 volts and works well for color blending and black and gray .it also includes a one of a kind hand made oak box with mounting post and has hand pinstriping on the top and front also by Jason Haney
(7 images)
one off by badbrass

one off by badbrass

handcarved by jason haney
(4 images, 3 comments)
one thing, then another

one thing, then another

This footswitches life started as a very simple one color hardwood footswitch. As it wasn't selling, we decided to breathe new life into it. It has been dye faded from blue to green to yellow and then pinstriped with drop shadow. It also features external binding posts and railing to protect the switch itself.This footswitch is a workhorse and would be a beautiful addition to any collection. If anyone is interested in purchasing it, it's price will be $150 as all of our footswitches will now be $150 and under unless you are looking for a one off custom.thanks.
(1 image)
oni

oni

oni
(1 image)
* Featured Page *
P. Rogers Black Widow by jason haney

P. Rogers Black Widow by jason haney

you are looking at a as of now 1 of a kind brass P. Rogers Black Widow by jason haney w/ yoke . this badbrass machine is a gift for my best friend ed bell and is not for sale . if you are into a machine or footswitch get with me at fltattoos31@yahoo.com
thank you for your time
jason haney
(4 images)
Pink & Purple Surprise

Pink & Purple Surprise

This new Bad Brass footswitch by Jason Haney is a very heavily modeled maple base dyed a beautiful purple fade with eye-popping pink pinstriping to set it off. It is already getting a lot of attention and is a favorite of almost everyone who has seen it. Unfortunately, it is a surprise piece for someone we can't name yet and is not for sale. However, it is a good example of what Jason can do and something for you to consider when having Bad Brass do a custom machine or footswitch for you.
(1 image, 1 comment)
* Featured Page *
Pinstriped Cocabola Hardwood

Pinstriped Cocabola Hardwood

This is a handmade pedal made from cocabola wood and a restored antique
switch. The color is completely natural, no stains, just pinstriping
under a clear lacquer for easy cleaning. As this pedal has been
extensively restored, and is very customized, the price will be $175. Please
contact me if you are interested or have any questions, thanks!
(3 images)
portraits

portraits

(2 images)
pretty in pink

pretty in pink

This is one of the latest foot-switchs from Jason Haney and Bad Brass
Productions. This snazzy pink foot-switch is made from a beautiful highly modeled wood and is
lacquered for easy cleanup. In between all of that it is a beautiful black to red fade and pinstriped with pink and red . a unique freestyle
design. this one is sold but it is a good example of what Jason can do and something for you to consider when having Bad Brass do a custom machine or foot-switch for you.for more info contact Jason at tattoomachinez.com
(4 images)
Raspberry stain

Raspberry stain

This is a one of a kind full-size liner from Jason Haney and badbrass.bom . This machine has been stained a beautiful raspberry color and pinstriped cream with maroon drop shadows. It is an excellent color packer, featuring an eikon true hit armature bar and spring setup and runs very efficiently at 6.5 volts. If you are interested ih a new machine, please contact us . To see more of Jason's machines and footswitches, go to badbrass.com
(4 images)
re-build

re-build

rogers style,jason haney re-build bad brass tattoomachinez.com 2008
(2 images)
* Featured Page *
red ,orange to yellow.

red ,orange to yellow.

This coffin foots-witch is dye-faded from red ,orange to yellow, with a beautiful antique coin and is pinstriped with a drop shadowed . The wood used has a very strong visual effect. This pedal would be an incredible addition to any collection, and is for sale at the price of 220. with shipping.If you would like to buy this foot-switch or have something built for you, we would be happy to start your new Bad Brass machine or foot-switch any time. To see more of Jason's machines and foot-switches, go to http://www.tattoomachinez.com or to get this one e-mail me at fltattoos31@yahoo
(3 images)
* Featured Page *
set of  3

set of 3

here are some pics of a set of three machines i built last week . im sorry but these machines are SOLD. if you would like to get a machine or foot-switch built just for you all you have to do is let me know . for more info e-mail me at fltattoos31@yahoo or stop bye tattoomachinez.com
thank you for your time
jason haney
tattoomachinez.com
(6 images)
* Featured Page *
sick a$$ shader

sick a$$ shader

This is one of my big prick shader's built for very well known New York /New Jersey artist. its a brass frame with damascus a-bar and yoke with 8 wrap coils.this machine runs very strong at low voltage and will make a great daily driver.
If you are looking to have a costume machine built please let me know at fltattoos31@yahoo.com you can also check out tattoomachinez.com for more of my for sale machines.IF YOU ARE NOT A PRO TATTOOER THERE IS NO NEED TO EVEN TRY CONTACTING ME AS YOU WILL NOT GET ANYTHING FROM ME OR TATTOOMACHINEZ.COM...

thank you for your time
jason
(5 images)
* Featured Page *
silver bullet dawg...

silver bullet dawg...

This is a one off silver, hand carved bull dog tattoo machine. it is built, carved and cast by jason haney. this machine is for sale at the price of $350. + .10 for shipping. you can find this machine and many more at TATTOOMACHINEZ.COM

thanks for checking it out.
(6 images)
* Featured Page *
silver little prick ,walker liners.

silver little prick ,walker liners.

here are 2 liners i did. one for a friend in TX. ,and the other for a friend in IL. they are cut back have in set yokes, 8 wrap coils ,copper coated hardware and have bin silver plated . they are zippy lil liners and have bin a lot of fun to build. if you like what you see and want to have one built for yourself please contact me at jason@tattoomachinez.com for more info.
PROS ONLY!! IF YOU ARE NOT A PROFESSIONAL TATTOOER PLEASE DONT WAST MY TIME WITH A BUNCH OF QUESTIONS. I WILL NOT SELL A MACHINE OR TELL YOU HOW TO TUNE THE JUNK YOU GOT OUT OF THE BACK OF A TATTOO MAG. SORRY...
(10 images)
* Featured Page *
skitzomatic

skitzomatic

this is one of my lil prick liners that has bin carved for a good friend of mine. very fast machines and will run any grouping you give it. please comment if you like it. if your looking to having a machine built , please contact me through tattoomachinez.com . thanks for your time.
(6 images)
* Featured Page *
skull and scorpion add blood hold the mayo

skull and scorpion add blood hold the mayo

(3 images)
* Featured Page *
skull boy foot-switch

skull boy foot-switch

Another cool foot-switch from Jason haney. for more info on how to get one of your own contact me at fltattoos31@yahoo

Thank you for your time and dont forget to check out the new home of jason haney
tattoomachinez.com
(2 images)
* Featured Page *
slayer skull

slayer skull

slayer skull from back in the day.
(4 images)
some cool  foot - switches for the STL expo

some cool foot - switches for the STL expo

some cool foot-switches for the stl show
iof you would like one for you self just message me and ill do my best. thank you for your time.
(5 images)
some cool new stuff for the STL show

some cool new stuff for the STL show

here are some walker machines im working on for the saint louis old school tattoo expo this weekend. come on out and get a tattoo from some bad ass tattooers.see you there
(6 images)
some cool new stuff for the STL show

some cool new stuff for the STL show

here are bull dog machines im working on for the saint louis old school tattoo expo this weekend. come on out and get a tattoo from some bad ass tattooers.see you there
(6 images)
some new and some old

some new and some old

(5 images, 1 comment)
some new work

some new work

(4 images)
St. Louis Old School Tattoo Expo

St. Louis Old School Tattoo Expo

NOVEMBER 9, 10, 11, 2007
3 Days of Tattooing from the Best Tattoo Artists from Around the World. 3 Days of Contests, Seminars and Presentations.stop in and say hello!
(2 images)
* Featured Page *
Star re-build

Star re-build

here is a rebuild i did for a close friend here in san antonio .it was a full bottom up re-build of a star liner frame from uni-max . if you would like to have something like this done to one of your machine the price would be 100-150, sometimes more depending on what all you would want done. you can hit me up here or e-mail me at jason@tattoomachinez.com
... for your time and dont forget to check out tattoomachinez.com for the best machines you can buy.
(3 images)
* Featured Page *
Tattoo Machine Foot-Switch (HAND MADE)

Tattoo Machine Foot-Switch (HAND MADE)

This is a hand made tattoo machine foot-switch built by myself , Jason Haney . It is not something that i bought and fixed up . The parts were not made someplace else, it is HAND MADE.The only things i did not make myself are the screws , coins and the small spring under the cross arm.it features a 1/4 brass engraved base, brass key base and steel and copper hardware . She is very beautiful and perfectly functional .She will make a great addition to anyone's collection .I would like to thank Nick Blueline for reviving this style of foot-switch . his work is truly an asset to the tattoo industry . shipping will be 10.00 and will include insurance . IF YOU ARE NOT A PROFESSIONAL TATTOOER DON'T BID , (PRO'S ONLY , NO EXCEPTIONS ) It is listed on ebay at this URL.
http://cgi.ebay.com/T...
(3 images)
* Featured Page *
tattoomachinez.com is now up and runnin!!

tattoomachinez.com is now up and runnin!!

go have a look and bookmark the site then go tell all your frends.
thanks for checking us out
Jason , Joshua,Larry and john
(3 images)
* Featured Page *
tattoos by jason haney

tattoos by jason haney

tattoos
(10 images)
tattoos by jason haney 2

tattoos by jason haney 2

(9 images, 2 comments)
* Featured Page *
tattoos by jason haney 3

tattoos by jason haney 3

(7 images, 2 comments)
The all new " little prick"

The all new " little prick"

This mini liner is my newest production machine and will be available upon request exclusively on tattoomachinez.com (the stock machine will not be carved and will come in brass or bronze it will also be hand signed and numbered) . It is called the little prick . This machine runs on very low volts and could handle any size grouping . This on is for sale at the price of 350 but a stock will cost you $300 + $10.shipping) Check it out along with many very cool machines at tattoomachinez.com
Thank you for your time
(3 images, 1 comment)
* Featured Page *
The Mean Purple & Green Machine

The Mean Purple & Green Machine

This is a Bad Brass full size liner that has been veneered with birds-eye maple, faded from purple to woodgrain and pinstriped then lacquered for easy cleaning. She's a beauty and the price for this machine will be $225. If anyone is interested in the other pinstripe machine, the price has been lowered to match this machine. Please contact me if you are interested in either machine. Thank you.
(3 images)
The National Brass Mako

The National Brass Mako

here is a national mako that i did as a re-build. there is extensive work on the frame such as removing the swing gate, in laying a piece of African burl wood, removing the national logo and some copper plating . it is a very punchy liner that runs on around 5 volts . it also features copper plated hard ware and a-bar/spring set. if any one is in to it is for sale at the price of $300.oo pay pal please and thank you for your time
e mail Jason Haney at fltattoos31@yahoo.com
see more cool stuff at
http://www.tattooartist...
(6 images)
three re-builds

three re-builds

one is a notionel swing gate that i removed the swinging gate , built all new parts for. the other is a 2005 # 3 of 5 machines i built for the st. louis show in 05. iot has all new parts and runs like a top as dose the other one.the third is a jonesy i cast and built 2 or so years ago then just re-built for a friend .
thanks for checking them out and dont forget to go check out the site at tattoomachinez.com as i have 5 new machines up for sale.if you would like a costume machine build for you just let me know at fltattoos31@yahoo or message for more info.
(8 images)
* Featured Page *
tiger face B&G

tiger face B&G

(2 images)
Triple portal single  spiral.. just kidding,Jason Haney bio-mech

Triple portal single spiral.. just kidding,Jason Haney bio-mech

This is a modified and heavily carved bad brass fullsize cutback liner
by Jason Haney. It features 6 wrap silk coils with 3/8" cores. It
runs great at between 5 and 6 volts as a liner, with a duty cycle of
44 to 45 at 110 megahertz.. very punchy liner. The carving is of
Geiger inspiration and features three cascading portals and a single
spiral around the rear binding post. Unfortunately this machine is
not for sale, but is a good example of the kind of work we can produce
for you. You can see more of Jason's work at badbrass.com
(6 images, 4 comments)
* Featured Page *
two new footswitches from badbrass.com

two new footswitches from badbrass.com

here are two new footswitches. They are both very natural and completely handmade. Finishes are cleanable. Craftsmanship is second to none. Both pedals are for sale. Contact through badbrass.com
(5 images)
update

update

here are updates of 2 of the line pics i just found .
(2 images)
Very nice foot-switch

Very nice foot-switch

This coffin footswitch is dye-faded from blue to green to yellow, with a beautiful antique coin and is pinstriped with a drop shadowed . The wood used has a very strong visual effect. This pedal would be an incredible addition to any collection, but is no longer for sale.If you would like something built for you, we would be happy to start your new Bad Brass machine or footswitch any time. To see more of Jason's machines and footswitches, go to http://www.tattoomachinez.com or to get this one e-mail me at fltattoos31@yahoo
(5 images)
* Featured Page *
walker

walker

rose walker . its a very sweet liner . message me for any of your machine needs and dont for get to check out tattoomachinez.com for 5 new machines coming this week.

thanks for your time
(4 images)
* Featured Page *
walker re-build

walker re-build

this is a re-build of a gus walker, not that it needed it at all as it was a kick ass machine before. this was done for a client and is not for sale . re-builds are 150.00 to start and that includes engraving and much much more. if you would like a machine re-built i would be more then happy to get it worked out for you . all you have to do is contact me through this site or e-mail me at jason@tattoomachinez.com i can also be contacted through tattoomachinez.com using the contact function.


thanks for your time and be sure to check out all the other killer builders on tattoomachinez.com for the most up to date custom and hand made tattoo machine this industry has to offer .

jason,
(4 images)
* Featured Page *
wlker shader

wlker shader

this is a walker shader , its a very hard hitting long stroke shader that runs at about 6 volts under a load at a speed of about 92 Hz. its for sale for 350 on my site tattoomachinez.com
(pros only) no EXCEPTIONS
(4 images)
WOOD INLAY BY BADBRASS.COM

WOOD INLAY BY BADBRASS.COM

THIS ONES A DOZIE , ITS HANDMADE AND HAS INLAID BURLED MAPLE LAQUERED FOR EASY CLEANING IF YOU LIKE IT IT IS FOR SALE. FOR MORE INFO SEE BADBRASS.COM
(6 images, 1 comment)
x-mas gift for???

x-mas gift for???

this is my contribution for the x-mas trade program we are doing on my forum.if you are a member of the www.machineheadproductions.com forum and would like to participate , log on and go to the trading post section for more information .its a lil prick liner version 1.250 .its silver plated with blue hardware , inset yoke ,silver plated binding post, antique 1930s cotton wire on the a set of 5/16 -1.250" core, inset spring deck with blue deck clamp ,the frame itself is brass with a steel collar inset into the tube vice . its pretty fast at 125 Hz but very strong at 5.5 volts .
(5 images)

 Artist:   Jason Haney  ( ) Contact Artist 
Jason Haney
tattoos foot-switches and tattoo machines by JASON HANEY.for more info e-mail me at jason@tattoomachinez.com

http://badbrass.com



Browse by Category